Nothing beats the exhilaration of cruising through a snowy landscape on a snowmobile in the winter. However, when your snowmobile bogs down, that joy quickly leaves place to frustration. So, what can cause your snowmobile to bog down, and more importantly, what can you do to fix it?
Reasons why your snowmobile bogs down include dirty or stale fuel, a faulty carburetor, using the wrong oil, or a slipping clutch. Easy fixes include changing the fuel, fixing the carburetor, using the right oil, and fixing the clutch.
In this article, I’ll describe the ten most common reasons why your snowmobile might be bogging down and what you can do about it. Read on for advice on keeping your snowmobile running smoothly all season long!
1. You’re Using Dirty or Old Fuel
If you’re using old or dirty fuel, this could be the cause of your snowmobile bogging down. Over time, fuel breaks down and can form deposits in the fuel system. These deposits can clog your injectors and carburetor, preventing proper fuel delivery. As a result, your snowmobile may run lean and bog down.
Besides, if the fuel is contaminated with water, it can cause even more problems. Water in fuel can cause corrosion and lead to engine damage.
How To Fix
If you’ve been using stale fuel, it’s time to throw it out and get some fresh fuel. Otherwise, you risk ruining the engine and causing other problems.
To avoid using stale fuel:
- Buy fuel that has a high octane rating and is designed for snowmobiles.
- Add a fuel stabilizer to your fuel to help extend its shelf life.
- Don’t store fuel for more than 90 days.
Pro Tip: To keep your fuel fresh for long, use this STA-BIL Storage Fuel Stabilizer from Amazon.com. It’s easy to use and it will help keep your fuel fresh for up to 2 years. Besides, it’s versatile and works on most gasoline engines, making it a great choice for your snowmobile.
2. The Fuel Line Has Collapsed
The fuel line is a critical part of the fuel system and is responsible for delivering fuel from the tank to the engine. If the fuel line is damaged or collapsed, it can restrict fuel flow and cause your snowmobile to bog down (source).
Moreover, if the fuel line is leaking, it can cause a loss of pressure in the fuel system. Besides being a fire hazard, that can also lead to a bogging issue.
How To Fix
If the fuel line has collapsed, you must fix it immediately to avoid putting yourself and your snowmobile at risk. As I mentioned, a collapsed fuel line can cause a fuel leak, leading to a fire.
To replace the fuel line:
- Turn off the engine and disconnect the spark plug wire.
- Remove the gas tank cap and drain the fuel into a container.
- Disconnect the fuel line from the carburetor.
- Remove the old fuel line and replace it with a new one.
- Reconnect the fuel line to the carburetor and gas tank.
- Turn on the engine and check for leaks.
Caveat: If you’re not comfortable replacing the fuel line, take your snowmobile to a qualified mechanic. Additionally, ensure that you use the correct fuel line for your vehicle. Most importantly, keep all potential fire sources, including cigarettes, away from the fuel line while you’re working on it.
3. Your Carburetor Is Dirty or Damaged
The carburetor is another crucial component of the fuel system. It’s responsible for mixing air and fuel before it’s delivered to the engine. If the carburetor is dirty or damaged, it can cause a loss of power and bogging.
A dirty carburetor can be caused by a build-up of deposits from old or contaminated fuel. That can prevent the carburetor from working correctly and cause your snowmobile to bog down.
How To Fix
If the carburetor is dirty or damaged, it must be cleaned or replaced. To clean the carburetor:
- Turn off the engine and disconnect the spark plug wire.
- Remove the gas tank cap and drain the fuel into a container.
- Disconnect the carburetor from the engine.
- Remove the float bowl and jets.
- Clean all of the parts with carburetor cleaner and compressed air.
- Reassemble the carburetor and reconnect it to the engine.
- Turn on the engine and check for leaks.
Here’s a video demo of how to clean a carburetor:
If the carburetor is damaged, it must be replaced. To do this, you’ll need to take it to a qualified mechanic.
Caveat: Don’t try cleaning or replacing the carburetor if you’re not comfortable doing so. Additionally, make sure that you use the correct carburetor for your snowmobile.
4. You’re Using the Wrong Oil
If you’re using the wrong type of oil in your snowmobile, it can cause all sorts of problems, including bogging. Bad oil can cause deposits to build up in the engine and lead to engine damage. That, in turn, can cause a loss of power and bogging.
Additionally, if the oil isn’t changed often enough, it can break down and form a sludge. That can also clog up the engine and lead to a loss of power and bogging.
How To Fix
If you’ve been using the wrong oil, it’s time to switch to the correct variety.
To find the correct oil for your snowmobile, consult your owner’s manual or the dealer where you purchased the snowmobile.
Once you’ve figured out the right type of oil for your snowmobile, make the switch and dispose of the old oil properly.
Caution: Don’t mix oil types. For example, don’t mix two-stroke oil with four-stroke oil. Doing so can damage your engine.
5. Your Clutch Is Slipping
The clutch is responsible for transferring power from the engine to the track. If the clutch is slipping, it can cause a loss of power and bogging.
There are a few reasons why the clutch might slip, such as:
- Wear and tear due to age or use.
- A build-up of deposits from old or dirty oil.
- Damage from rocks or other debris.
- Incorrect adjustment of the clutch.
How To Fix
As I mentioned, a slipping clutch can cause your snowmobile to bog down. To inspect the clutch:
- Turn off the engine and disconnect the spark plug wire.
- Remove the gas tank cap and drain the fuel into a container.
- Disconnect the drive belt from the clutch.
- Inspect the drive belt for cracks, fraying, or other damage.
- Inspect the clutch for wear.
- If the drive belt or clutch is damaged, replace it.
6. You Have a Bad Spark Plug
The spark plug is responsible for igniting the fuel in the engine. Specifically, this part ignites the air-fuel mixture in the cylinders. If it’s old or damaged, you may notice your snowmobile bogging down.
You may also notice that the engine is running less smoothly. Moreover, a faulty spark plug can cause starting problems.
There are a few reasons why the spark plug might be damaged or fouled. These inclide:
- The spark plug is too old and needs to be replaced.
- The gap between the electrode and the spark plug’s tip is too wide or too narrow.
- The spark plug is wet, dirty, or covered in oil.
- There is a build-up of carbon on the electrode.
How To Fix
If a bad spark plug is the reason your snowmobile is bogging down, the fix is relatively simple: replace the spark plug.
To do this, you’ll need to consult your owner’s manual to find the correct spark plug for your snowmobile. Once you’ve found the correct spark plug, follow these steps to replace it:
- Turn off the engine and disconnect the spark plug wire.
- Remove the spark plug with a spark plug wrench.
- Install the new spark plug and tighten it with a spark plug wrench.
- Reconnect the spark plug wire.
Caveat: Don’t over-tighten the spark plug, or you risk damaging it.
7. You Have a Vacuum Leak
A vacuum leak is another potential cause of bogging. A leak can occur in the intake manifold, carburetor, or cylinders.
A vacuum leak can cause a loss of power and bogging because it allows air to enter the engine without being metered by the carburetor. As a result, the engine may run lean and bog down.
In addition, a vacuum leak can cause the engine to run rough.
How To Fix
A vacuum leak can cause your snowmobile to bog down. To check for leaks:
- Park your snowmobile on a level surface and turn it off.
- Disconnect the spark plug wire from the spark plug
- Remove the air filter cover and housing.
- Crank the engine and look for leaks around the carburetor, intake manifold, and head gaskets.
8. The Fuel Filter Is Clogged
If the fuel filter is clogged, it can restrict fuel flow to the engine and cause your snowmobile to bog down. A clogged fuel filter can be caused by a build-up of deposits from old or dirty fuel.
Besides, if the fuel filter is old, it can quickly become clogged. That’s because the filter has a limited capacity for trapping contaminants.
How To Fix
If the fuel filter is clogged, it will need to be cleaned or replaced.
To clean the fuel filter:
- Turn off your snowmobile and disconnect the negative battery cable.
- Drain the fuel from the gas tank into a container.
- Remove the fuel line from the filter and disconnect it from the carburetor.
- Soak the filter in the carburetor cleaner for 30 minutes.
- Dry the filter with compressed air and reinstall it.
- Reconnect the fuel line to the carburetor.
Note: If the filter is damaged, it must be replaced. To do this, you’ll need to take it to a qualified mechanic.
9. You Have a Damaged Fuel Pump
The fuel pump delivers fuel from the tank to the carburetor. If the fuel pump is damaged, it can cause bogging.
Besides, a damaged fuel pump can also lead to other engine problems, such as starting issues, stalling, and loss of power.
Some of the typical causes of damaged fuel pumps include:
- Wear and tear: Over time, the fuel pump can wear out from constant use. That can cause the pump to work less efficiently and eventually fail.
- Damage from debris: If there is debris in the fuel tank, it can damage the fuel pump. Debris can enter the fuel system through a hole in the fuel tank or a cracked fuel line.
- Damage from water: If water gets into the fuel system, it can damage the fuel pump by promoting rusting. Water can enter the system through a leaking fuel line or a hole in the fuel tank.
How To Fix
If the fuel pump is damaged, it will need to be replaced. Since this is a delicate procedure, I recommend taking your snowmobile to an experienced mechanic. They’ll ensure the replacement fits your model by checking the part number or consulting your owner’s manual.
If you’re comfortable replacing the fuel pump yourself, follow these steps:
- Turn off your snowmobile and disconnect the negative battery cable.
- Drain the fuel from the gas tank into a container.
- Remove the gas tank and set it aside.
- Remove the old fuel pump and install the new one.
- Reinstall the gas tank.
- Reconnect the negative battery cable.
10. The Throttle Linkage Is Incorrectly Positioned
The throttle linkage is responsible for opening and closing the throttle. If it’s in the wrong position, it may not open the throttle fully, which can lead to loss of power and bogging.
Furthermore, an incorrectly positioned throttle linkage can cause starting problems and stalling.
The throttle linkage can become misaligned due to damage or wear and tear. Moreover, if the snowmobile is equipped with an aftermarket throttle, it may not have been properly installed.
How To Fix
If the throttle linkage is incorrectly positioned, you must adjust it to stop your snowmobile from bogging down. To do this:
- Consult your owner’s manual for specific instructions on how to adjust the throttle linkage on your model of snowmobile.
- Once you’ve adjusted the throttle linkage, start the engine and test-drive the snowmobile to see if the issue has been resolved.
Summary
A bogged-down snowmobile can be caused by several issues, including dirty or old fuel, a collapsed fuel line, a dirty or damaged carburetor, the wrong oil type, a slipping clutch, a bad spark plug, vacuum leaks, and more.
You can resolve most of these issues relatively quickly. However, if you’re unsure about how to fix the problem, I recommend taking your snowmobile to a qualified mechanic. They’ll quickly diagnose and fix the issue so you can get back on the slopes in no time!
Recommended Reading